The Short Ten - How many shooting one?

[John Truitt]

Ed,

NO non of the side challenge events do. They are open to both hammer and hammerless Parkers and LC Smiths.
This is true for the 16 ga, 20 ga and the new 10 ga events for the five stand challenges.

Again only for Parkers and LC Smiths.

All my best,

John

[Mike of the Mountain]

Originally Posted by John Truitt

Just a friendly reminder that we are having a 10 ga Parker vs Lc Smith five stand challenge at the Spring Southern side by side this coming April. It will be on the Wednesday of the southern

We'll be there!!!!!! Looking forward to it.

[Jack]

I don't have a Parker short ten (at least not yet) but I do have three Remington short ten hammer guns. Two of them are 2 5/8" and one is 2 7/8".

Required Parker content: the only 10 gauge all-brass shells I can find are the Parker reproductions from Track of the Wolf. I bought some to make black powder shells, but they aren't cheap - over $7 each. Ouch! Wish there was a less expensive source.

This is a great, long-lasting thread!

[charlie cleveland]

jack you can buy plastic hulls 3 1/2 10 ga hulls cut them to lengtgh desired and use smokeless powder...pete lester has lots of loads listed we all use on this site...but if black powder is your game them brass shells are the way to go....charlie

[Tom Poss]

Loading some now for Pheasants--10ga under lifter!!

[Mike of the Mountain]

Originally Posted by charlie cleveland

jack you can buy plastic hulls 3 1/2 10 ga hulls cut them to lengtgh desired and use smokeless powder...pete lester has lots of loads listed we all use on this site...but if black powder is your game them brass shells are the way to go....charlie

If you don't want to use brass you can use paper hulls. Federal and Fiocchi make nice paper shells. Then you don't need to deal with plastic fouling in your bbls. Use fiber/card wads too and the bbls will be cleaner.

[OH Osthaus]

Originally Posted by Mike Koneski

If you don't want to use brass you can use paper hulls. Federal and Fiocchi make nice paper shells. Then you don't need to deal with plastic fouling in your bbls. Use fiber/card wads too and the bbls will be cleaner.

In 10 gauge? that would be great

[Mike of the Mountain]

My bad, I was thinking 12g. If I loaded BP for 10g I'd try to find paper hulls or use plastic hulls with fiber/card wads. If they were used hulls, I'd throw them out after using it as the heat from the BP may make the plastic deteriorate.

[Mike of the Mountain]

Ballistic Products is selling plastic, new, primed Federal 10g hulls that can be cut down.

https://www.ballisticproducts.com/Fe...tinfo/0621035/




Review:
Tough hulls! 7/10/2014
Im running black powder thru these hulls. I made a handloading set and reload them with steel and lead. 95-100 gr. 2F bp. I have 5 reloads and the hulls still have at least 3 more left. Great, great product
- Josephine Sullivan, ME

[Richard Flanders]

The one time I used my 10ga hammer gun to do my "outhouse shoot" I found that I got small holes burned in both once-used and reloaded hulls. Black powder and plastic hulls are a bad idea unless you only intend to use them once.