Visit Brian Dudley's homepage! | |
11-10-2012, 04:51 PM | #3 | ||||||
|
i am more than willing to buy a set of two if i can find them or have them made. been looking for almost two years and on ebay, no luck. any help would be great
|
||||||
11-11-2012, 08:27 AM | #4 | ||||||
|
Jack:
You may have some luck contacting Dick Chubb. He has TONS of hammers, original and repro. His email is bchubb@comcast.net Best, Kensal |
||||||
01-14-2013, 10:06 AM | #5 | ||||||
|
hello
i have an 1883 twist barrel parker shotgun(butt number 33941) that's missing its extractor i would like to buy one,either original or new can anybody help me serge ferré |
||||||
01-14-2013, 10:21 AM | #6 | ||||||
|
I would send you a pm, but it is not an option for you. I may have an extractor for you. What guage and frame size is your gun? I take it that it is a top action hammer gun?
__________________
B. Dudley |
||||||
extractor missing |
01-14-2013, 11:59 AM | #7 | ||||||
|
extractor missing
hello Brian
thank you for such a quick response i'm not sure how to answer your question though from the markings and common sense the shotgun is a 12 guage the barrel type is a Twist the barrel part number is 18525 the butt part number is 33941 does this helps further? best serge |
||||||
01-14-2013, 02:06 PM | #8 | ||||||
|
Well, I asked what type of action the gun is (lifter of top action) and also what frame size. The frame size will be stamped on the bottom of the barrel locking lug.
__________________
B. Dudley |
||||||
01-14-2013, 04:40 PM | #9 | ||||||
|
bonsoir Brian
being french and living in france,now,i'm doing a catch-up course on shotgun semantics now i know what to call the part i'm missing...it's the forend... i'll check tomorrow what frame size i own my shotgun is top-lever-action and not lifter-action... am i making progress? the barrel is marked twist but the shotgun finishing is engravingf-less so a rather rudimentary piece...but hopelessly worthless without the forend the butt is stamped 33941,so manufactured in 1883 the barrel is stamped 18525 with a 12 merk in a circle and 2 letters stamped next to it an S on the left side and a T on the right side the barrel says Parker Brothers Makers Twist on the top side and tomorrow i should come up with the frame size itself there... bonsoir serge |
||||||
missing forend |
01-15-2013, 05:20 AM | #10 | ||||||
|
missing forend
...again...bonjour Brian
here's the final set of info... Butt # 33941 barrel markings Parker Bros Makers Meridian Conn Twist Fr 6 with a number 3 beneath it("lying down"...meaning the 6 is vertical and the 3 is horizontal) stampingsa circled T with top right cormer a J...and bittom right 5 with a small 12 underlined Barrel #18525 howdoes that fit? merci beaucoup hoping you do have the forend to fit my shotgun serge |
||||||
|
|