Front sight info needed

Keith Doty · 11-18-2023, 03:35 PM

My 16 ga GHE 222380 donated the front sight post to the dove gods this fall, doubtless laying in a sunflower field in Zavalla County, TX. The hole in the rib does not appear threaded, had a brass "post" type sight. I believe it is simply press fit and just got loose and fell out on the ground in the heat of battle. Can anyone point me to a replacement? Any help much appreciated!

B. Dudley · 11-18-2023, 04:36 PM

The standard bead would be a threaded (no2) nickel silver bead. A brass one would not be factory. So you are likely going to have to make or modify one to replace it.

Keith Doty · 11-19-2023, 10:56 AM

Brian, thanks for the information. Sounds like I need to examine the hole in the rib under a bit of magnification after detailed cleaning, quite possible I simply didn't see threads. Do you have source for a proper replacement? If so please advise, I'd like to replace it with an original or a quality reproduction. If the threads are not serviceable a tiny bit of good epoxy might be my best bet.

Craig Budgeon · 11-19-2023, 07:24 PM

Material is also known as German sillver and the original thread is 2-64.