|
11-29-2013, 02:48 PM | #3 | ||||||
|
Rick, whose roll crimper are you using? I have a Ballistic Products 16 ga. roll crimper, but am not satisfied with the rolled edge. It only has one ball, but they sell another with 2.
I have an old one that has 4 balls. It's the old bench top type that you crank. I have to see what the heck I did with it. |
||||||
11-29-2013, 06:17 PM | #4 | |||||||
|
Quote:
I have the old bench mount ones for 10, 12 and 16, all in good shape. I like the way they work on the federal papers, and they do OK on the plastic, although a second load takes some heating and straightening of the hulls' mouth on the plastic ones. I will post some pictures later of the results - we have family coming tomorrow - so I'm busy between getting some cooking prep done, and trying to get the dog hair out of the hidden corners
__________________
"If there is a heaven it must have thinning aspen gold, and flighting woodcock, and a bird dog" GBE |
|||||||
11-17-2013, 07:13 PM | #5 | ||||||
|
I haven't reloaded any yet. I am using AA feather lite #22 mec powder bushing and ballistics products wad part # 072src , inside dimensions are similar to the STS hulls I normally use
|
||||||
11-18-2013, 01:45 PM | #6 | ||||||
|
How much powder ? Different powder charges can be thrown by different people using the same bushing, so telling us what bushing you're using isn't much help. Paper shells after a couple of reloads will get burn holes just above the brass and should be discarded. They are fun to shoot and look cool with a roll crimp. I like to use paper wads also.
__________________
Paul Harm |
||||||
11-18-2013, 05:30 PM | #7 | ||||||
|
how ya doing mr. harm ... my #22 mec powder bushing throws between 12 and 12.2 grains of AA LITE every time. I like paper wads also but do you know anyone who makes them. it takes me a lot of time to make them. in 2 3/4 in shells I load 15.0 grains with a 3/4 oz of #9 shot for skeet, using the AA lite. say are we going to have a SxS shoot this winter
|
||||||
11-19-2013, 09:23 AM | #8 | ||||||
|
Paul, you can get paper wads from www.circlefly.com - just tell Craig what you're loading and he'll be glad to help. I get the 1/2" thick cushion wads - they're easy to split in case you need to make up a different thickness, like 3/4". That and a .125 over powder wad, and a .028 over shot card. Your wad is for a 1oz load, but I didn't see in BP's description if it was for a straight walled hull. Is that hull you bought straight walled ? When I use plastic wads I like to use a shorter wad in the 2 1/2" shell. I use Claybuster wads [ which are way cheaper than BP's wads ] and use the CB-3118-12AR , which is a 1 1/8oz wad and load 7/8oz of shot in it. Because of it's lower cushion area, it loads very nice. About the winter shoot. If I thought there would be enough interest I'd have one. Have to wait and see.
__________________
Paul Harm |
||||||
11-19-2013, 09:51 AM | #9 | ||||||
|
Paul, we buy wholesale so our price is a bit cheaper. I see Precision reloading [ www.precisionreloading.com ] has Claybuster wads and they're $9.99 for 500 where as the BP's wads are $7.89 for 250. BP's items I feel are way over priced. Precision usually carries the same product for less.
__________________
Paul Harm |
||||||
11-19-2013, 07:17 PM | #10 | ||||||
|
hi paul....the wads I am using in the paper hulls I shorten to 2.5 in. part # 072src are a non taper design they are with in a couple of thou. of inch from top to bottom. in 2 3/4 in. hulls I use clay buster wad part #cb1100-12 , I normally load 7/8 oz in this wad but when I use STS plastic hulls I load 1oz of shot in the same wad. I don't shoot the 1oz much any more . I practice mostly with clay buster #cb0175-12 with 15 grans of AA LITE in modern guns I shoot in skeet tourneys . I am starting to load black powder , what do think would be a nice starting point with these paper hulls?
|
||||||
|
|