I recently picked up a factory 26" barreled 12g. DHE to use as my new shooter for a while. This gun was in good overall original condition with nice engraving, good screws, original SSBP and fully functioning.
However, the gun was well used and was lacking in the cosmetic finish department.
Frame has some case colors remaining. Mostly on the upper tang and in protected areas. Stock finish is dry and checkering has some wear. All will eventually be addressed. I do not plan to do anything with the CCH. No need to really. First things first was the barrels. They were completely dent free and have perfect bores. But the original bluing was very well worn and completely gone in some areas. And the exterior had its fair share of scratches and light marks/knicks and micro pitting. Nearly all barrel sets need a little more work that one might think, but these ones were not all that bad. A little light draw filing in some areas and careful polishing gave a nice surface for new rust bluing.
DHE 1.jpg
DHE 2.jpg
IMG_2476.jpg
IMG_2478.jpg
IMG_2485.jpg
IMG_2487.jpg
IMG_2488.jpg
Trigger guard will have to be re-blued as well. But another time. I will most likely address the worn stock finish next. When I get the chance.