Info on old parker needing parts
I have an old hammer gun that I was left by my father. SN 48228 leads me to conclude it is a 1886 12 ga., grade 1 with "Twist" barrels (they have been cut). All numbers match. It is in need of a correct left hammer, both hammer screws, 2 firing pin springs, and the flat trigger spring that hold the triggers in place. The stock was very broken up as it mounted to the receiver and I did an amateurish epoxy of the broken stock pieces and have been able to reassemble the stock to the receiver. it cocks and will fire I think. My question is two fold: Are the parts available at a reasonable price to make it complete ; or do I have a parts gun? It has little bluing left but is clean of rust.
|
Threaded Mode