Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Non-Parker Specific & General Discussions Shotgun Shell Reloading

Notices

Reply
Thread Tools Display Modes
Looking for a New 20ga. Recipe
Unread 04-08-2020, 04:17 PM   #1
Member
edgarspencer
PGCA Member
 
edgarspencer's Avatar

Member Info
 
Join Date: Sep 2011
Posts: 6,053
Thanks: 2,904
Thanked 11,371 Times in 3,072 Posts

Default Looking for a New 20ga. Recipe

My present, and long time favorite 20ga. load is dying a slow death from starvation. Starving for PB, that is.
Since I have lots of Chedite hulls, and lots of SG20S, and SG20M, I am looking for a recipe using those wads and hulls. Preference is for for SG20S in 2 1/2" loads with 7/8oz, and SG20M in 2 3/4".
I have been offered a quantity of Alliant 20/28, so a recommended powder charge is what I'm after, to achieve under 9K psi.
edgarspencer is online now   Reply With Quote
Unread 04-08-2020, 09:21 PM   #2
Member
Harold Pickens
PGCA Member
 
Harold Lee Pickens's Avatar

Member Info
 
Join Date: Mar 2011
Posts: 3,623
Thanks: 2,120
Thanked 7,771 Times in 2,005 Posts

Default

Edgar, I love 20/28 for both 3/4 and 7/8 oz loads--but I use AA and Gun Club hulls. I checked the Alliant site , but couldn't find any loads with cheddite hulls listed. I also have downloaded from the old Yahoo 16 ga reloading site, the 20 ga spreadsheets, but they don't list any loads with cheddite hulls and 20/28, they do have some with Federal hulls which are also straight walled like the cheddite. I was using Unique in 20 ga cheddite.
Hope you are doing well, was really looking forward to seeing you at Hausmann's this summer but that is not looking promising under the current situation.
BTW, the 20/28 loads I use are under 8000 psi
__________________
"How kind it is that most of us will never know when we have fired our last shot"--Nash Buckingham
Harold Lee Pickens is offline   Reply With Quote
The Following 3 Users Say Thank You to Harold Lee Pickens For Your Post:
Unread 04-12-2020, 11:21 PM   #3
Member
Keith Doty
PGCA Member
 
Keith Doty's Avatar

Member Info
 
Join Date: Dec 2018
Posts: 570
Thanks: 545
Thanked 718 Times in 293 Posts

Default

PB has completely vanished from my part of the planet. I'm looking for possible loads for 2 1/2" 20ga. using either Universal or International Clays and SG20 wads, got lots of both. I've had real good success feeding my short 16s International and would sure like to get it working with a mild (under 8K) +/-1150 fps 7/8 oz load for the 20s. I'm using Cheddite hulls. Has anyone any experience in this direction?
Keith Doty is offline   Reply With Quote
Unread 04-13-2020, 12:25 AM   #4
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 31,557
Thanks: 35,430
Thanked 33,039 Times in 12,321 Posts

Default

I use one piece AA hulls with a Win 209 primer, Winchester Double A wads, 14 grains of 20/28 powder and 7/8 oz. of shot. I use this load in my newer steel barreled Trojan and VH but use the same load but with 13.3 grains of 20/28 in my older Damascus DH 20.





.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is offline   Reply With Quote
The Following 2 Users Say Thank You to Dean Romig For Your Post:
Unread 04-13-2020, 08:46 AM   #5
Member
Harold Pickens
PGCA Member
 
Harold Lee Pickens's Avatar

Member Info
 
Join Date: Mar 2011
Posts: 3,623
Thanks: 2,120
Thanked 7,771 Times in 2,005 Posts

Default

Couldn't find any loads using the SG20 wad listed in my 20 ga spreadsheets.
I use Claybuster 1078 and 1075--they are Win AA clones and a bag of 500 is ususally around $10.
I have used this load with Unique:
Ched 2 1/2"/ win or ched 209 primer/ Unique 16gr/CB1078/ 1186fps@ 7200 psi.

I have used this load in 2 3/4" cheddite, but may fit in a 2 1/2"--definitely will if dropped to 3/4 oz load:
Universal 17gr/ Win or ched 209 primer/CB 1078/ 1197 fps/ 7800 psi
__________________
"How kind it is that most of us will never know when we have fired our last shot"--Nash Buckingham
Harold Lee Pickens is offline   Reply With Quote
The Following 2 Users Say Thank You to Harold Lee Pickens For Your Post:
Unread 04-14-2020, 12:58 PM   #6
Member
Jeff Sweeter
PGCA Member

Member Info
 
Join Date: May 2017
Posts: 175
Thanks: 80
Thanked 398 Times in 87 Posts

Default

Here's a load I have used and recoil was mild.I have not had it tested.Im sure I found this listed here in the reloading forum.New Fiocchi hulls cut to 2 1/2 inch,16 grs.Universal,SG20M wad,8 fold crimp.It was listed as having 8500 PSI,and 1200 FPS.Another load with same hull and 3/4 oz.of shot,14 grs.20/28,CB1075 wad,8 fold crimp,listed as having 7500 PSI,at 1200 FPS.I would think you could sub a Cheddite hull and primer as both are straight walled hulls and very similar.Do this at your own risk as I have not had these tested.The load with 20/28 was a little smoky.The load with Universal was clean.These were fired in a Trojan with steel barrels.
Jeff Sweeter is offline   Reply With Quote
The Following 2 Users Say Thank You to Jeff Sweeter For Your Post:
Unread 04-14-2020, 01:50 PM   #7
Member
Jeff Sweeter
PGCA Member

Member Info
 
Join Date: May 2017
Posts: 175
Thanks: 80
Thanked 398 Times in 87 Posts

Default

Just made a correction.Didnt have the grains listed for the 20/28.
Jeff Sweeter is offline   Reply With Quote
Unread 09-05-2020, 08:56 PM   #8
Member
Chris Robenalt
PGCA Member
 
Chris Robenalt's Avatar

Member Info
 
Join Date: Nov 2017
Posts: 603
Thanks: 1,628
Thanked 1,060 Times in 283 Posts

Default

[QUOTE=Dean Romig;299644]I use one piece AA hulls with a Win 209 primer, Winchester Double A wads, 14 grains of 20/28 powder and 7/8 oz. of shot. I use this load in my newer steel barreled Trojan and VH but use the same load but with 13.3 grains of 20/28 in my older Damascus

Dean, do you know the psi/fps on this? I'd like to try it using 3/4 ounce of shot.
Thx Chris
Chris Robenalt is offline   Reply With Quote
The Following User Says Thank You to Chris Robenalt For Your Post:
Unread 09-05-2020, 09:15 PM   #9
Member
Harold Pickens
PGCA Member
 
Harold Lee Pickens's Avatar

Member Info
 
Join Date: Mar 2011
Posts: 3,623
Thanks: 2,120
Thanked 7,771 Times in 2,005 Posts

Default

Hey Chris, in Win AA With W209 primer and CB1075 wad-(chartruse):3/4 oz
14.5 gr 20/28 1200 fps @ 7200 psi
15.5 gr 20/28 1250 fps @ 7900 psi
So 13.3 gr 20/28 should be very mild, and I'm guessing around 1100 fps and in the 6000's psi. range
I usually load the 14.5 gr load for both my steel and damascus 20's. It is a nice load.
__________________
"How kind it is that most of us will never know when we have fired our last shot"--Nash Buckingham
Harold Lee Pickens is offline   Reply With Quote
The Following User Says Thank You to Harold Lee Pickens For Your Post:
Unread 09-05-2020, 10:17 PM   #10
Member
Chris Robenalt
PGCA Member
 
Chris Robenalt's Avatar

Member Info
 
Join Date: Nov 2017
Posts: 603
Thanks: 1,628
Thanked 1,060 Times in 283 Posts

Default

Hey, thanks Harold, I have all the components! I'll play with the powder amount....
Chris Robenalt is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:51 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.