16g

eddie gray · 10-23-2010, 06:38 PM

any recipes 16 g for ballistic products shells and wads sg16 using pb powder ?
tks eddie

charlie cleveland · 10-24-2010, 10:01 AM

hope somebody pipes in here for you....i looked in all my reloading manuels and did not come up with any thing for you.. charlie

Dave Miles · 10-25-2010, 01:46 PM

2-3/4" hulls or 2-1/2" hulls?

eddie gray · 10-25-2010, 06:38 PM

2 3/4 hulls

Dave Miles · 10-26-2010, 06:10 AM

The only load I have in my data base for PB powder with
Ballistic Products Multi-Hull 2-3/4"
Win. 209 primer
18.5 grains IMR-PB
SG-16 wad
1 oz. lead shot, 6 fold crimp
1100 FPS. @ 8350 PSI

eddie gray · 10-26-2010, 08:05 AM

i use 7/8 shot so 18.5 grains should be safe and less pressure ?

Dave Miles · 10-26-2010, 08:38 AM

Quote:

Originally Posted by eddie gray

i use 7/8 shot so 18.5 grains should be safe and less pressure ?

I think you'll find it hard to get a good crimp, unless you add filler.
However, this load should yield around 1200 FPS @ 7800 PSI with 7/8 oz.

eddie gray · 10-26-2010, 09:36 AM

have overshot cards from BP
should do the trick tks