Quote:
Originally Posted by Gerald McPherson
Well I looked inside and now I think there is a lot going on that is not visible even with the side plates removed concerning ejectors. I have never owned but one Lefever and it was an a grade 16 ga or was it called Grade A many years ago. Anyway I have been researching this HE grade for several days and I am finding more info on this site than elsewhere. Here are some things I have learned. Built around 1903. 2 5/8 in chambers. .667 in. bore. Right barrel is cylinder left is improved cylinder.Min. wall right 45 thou. left 35 thou. 26 inch barrels. XX for small frame. Seems Lefever referred to these as Brush Guns. The quality used to produce these old guns is amazing.It is obvious this gun was very used through through the years. The checkering has held up extremely well and I understand the wood is English walnut. Any comments appreciated still looking for more info. My quail hunting buddy Roy for many many years used a Grade A 16 ga with open chokes. Another friend Pete after hunting with Roy one day was very upset He said Roy killed nine birds while he was trying to catch his dog. I sure miss those fellows. Gerald.
|
I was looking at a 16 bore XX Frame Lefever yesterday and its bores are both .668" and chambers exactly 2-9/16”. You might check your tubes at the muzzle to see if they touch, which Lefever disciples take as proof positive the barrels haven't been cut. Also, you might verify the chokes are tapered right out to the muzzles. Cylinder choke will have a few thou of constriction as per practice at that time, and IC perhaps 6-8 thou of constriction.
Threaded Mode