Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Non-Parker Specific & General Discussions General Discussions about Other Fine Doubles

Notices

Reply
Thread Tools Display Modes
20 gauge hammer gun from a small gun show
Unread 07-13-2023, 09:01 AM   #1
Member
Tom Hawkins
PGCA Member
 
Tom Hawkins's Avatar

Member Info
 
Join Date: Jun 2009
Posts: 213
Thanks: 482
Thanked 294 Times in 84 Posts

Default 20 gauge hammer gun from a small gun show

I picked up this little 20 hammer gun at a small Kansas show that had less than 50 tables. The stock had been altered poorly but the inletting for the frame, sideplates, and lower tang were still excellent. I spent a few days mocking up a new stock and sent it with the blank to be duplicated. The maker is Richard Wostatek in Goding or South Moravia. The forend latch is unique as I have seen it on a few other older guns. The barrels are marked Excelsior Witten and are uncut 27.5 inches with a serial number of 157. On the monoblock there is an Austrian eagle with a 3 in the center of the shield. The final proof is June 21, 1899. Because the stock had been fubared, the price was a little more than a hardware single shot. I would like to know what the zero incorporated with the 2 on the top lever and top rib could mean. I would appreciate any helpful information on the maker or gun.
Attached Images
File Type: jpg 20 hammer forend latch.jpg (458.3 KB, 16 views)
File Type: jpg 20 sideplate.jpg (470.0 KB, 31 views)
File Type: jpg 20 barrel flats.jpg (468.4 KB, 13 views)
File Type: jpg 20 frame bottom.jpg (459.5 KB, 25 views)
File Type: jpg 20 hammer top lever.jpg (440.4 KB, 28 views)
File Type: jpg 20 hammer barrels.jpg (499.2 KB, 21 views)
__________________
"It doesn't matter if you hit or miss until you miss."
Tom Hawkins is offline   Reply With Quote
Unread 07-13-2023, 09:42 AM   #2
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 31,640
Thanks: 35,621
Thanked 33,237 Times in 12,377 Posts

Default

What a pretty little gun Tom!

Congrats!





.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is offline   Reply With Quote
The Following User Says Thank You to Dean Romig For Your Post:
Unread 07-13-2023, 02:12 PM   #3
Member
William Woods
PGCA Lifetime
Member

Member Info
 
Join Date: May 2016
Posts: 180
Thanks: 1,586
Thanked 203 Times in 82 Posts

Default

Quote:
Originally Posted by Tom Hawkins View Post
I picked up this little 20 hammer gun at a small Kansas show that had less than 50 tables. The stock had been altered poorly but the inletting for the frame, sideplates, and lower tang were still excellent. I spent a few days mocking up a new stock and sent it with the blank to be duplicated. The maker is Richard Wostatek in Goding or South Moravia. The forend latch is unique as I have seen it on a few other older guns. The barrels are marked Excelsior Witten and are uncut 27.5 inches with a serial number of 157. On the monoblock there is an Austrian eagle with a 3 in the center of the shield. The final proof is June 21, 1899. Because the stock had been fubared, the price was a little more than a hardware single shot. I would like to know what the zero incorporated with the 2 on the top lever and top rib could mean. I would appreciate any helpful information on the maker or gun.
Maybe it stands for 20gauge?
William Woods is offline   Reply With Quote
The Following User Says Thank You to William Woods For Your Post:
Unread 07-13-2023, 02:19 PM   #4
Member
B. Dudley
PGCA Lifetime
Member
 
Brian Dudley's Avatar

Member Info
 
Join Date: Aug 2011
Posts: 10,585
Thanks: 476
Thanked 17,541 Times in 4,621 Posts

Default

That is a nice one for sure. I have that same forend on an unmarked 12g. boxlock.

The 2 on the barrel would indicate that it was part of a 2 gun set. Or maybe a 2 bbl set.

Usually though if it is a 2 gun set, the barrels, frame and forend will be marked 1 or 2.
__________________
B. Dudley
Brian Dudley is offline   Reply With Quote
The Following 2 Users Say Thank You to Brian Dudley For Your Post:
Visit Brian Dudley's homepage!
Not quite finished but ready for dove opener.
Unread 08-31-2023, 05:34 PM   #5
Member
Tom Hawkins
PGCA Member
 
Tom Hawkins's Avatar

Member Info
 
Join Date: Jun 2009
Posts: 213
Thanks: 482
Thanked 294 Times in 84 Posts

Default Not quite finished but ready for dove opener.

Just a follow up on this gun. The stock is getting close but is functional for the dove opener. Based on past experiences I will bring a backup just in case. It pulls up nice and swings easy.
Attached Images
File Type: jpg 20 bottom.jpg (464.0 KB, 6 views)
File Type: jpg 20 hammer left.jpg (454.5 KB, 8 views)
File Type: jpg 20 hammer stock left.jpg (46.2 KB, 5 views)
__________________
"It doesn't matter if you hit or miss until you miss."
Tom Hawkins is offline   Reply With Quote
Unread 09-02-2023, 07:31 AM   #6
Member
Harold Pickens
PGCA Member
 
Harold Lee Pickens's Avatar

Member Info
 
Join Date: Mar 2011
Posts: 3,635
Thanks: 2,130
Thanked 7,829 Times in 2,017 Posts

Default

Similar fore end lever on this 16 ga, unknown maker. Bought it cheap at a gun show. 30 in steel barrels cyl and full, and 6 lbs. Fun gun to shoot. Unable to make out the name stamped on the rib, even with a magnifier.
Attached Images
File Type: jpg 20230902_072314.jpg (516.4 KB, 1 views)
File Type: jpg 20230902_072335.jpg (531.9 KB, 2 views)
File Type: jpg 20230902_072411.jpg (509.2 KB, 1 views)
__________________
"How kind it is that most of us will never know when we have fired our last shot"--Nash Buckingham
Harold Lee Pickens is offline   Reply With Quote
Unread 09-02-2023, 09:47 PM   #7
Member
charlie cleveland
PGCA Member

Member Info
 
Join Date: Jul 2009
Posts: 12,986
Thanks: 0
Thanked 7,794 Times in 3,967 Posts

Default

nice gun....charlie
charlie cleveland is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:09 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.