Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums Parker Restoration

Notices

Reply
Thread Tools Display Modes
Advice needed concerning my GHE
Unread 06-01-2021, 05:25 PM   #1
Member
Roberto S Siciliano
Forum Associate

Member Info
 
Join Date: May 2021
Posts: 83
Thanks: 53
Thanked 22 Times in 14 Posts

Default Advice needed concerning my GHE

RE: my GHE 12ga hammerless

I just separated the receiver from the stock [thanks to Brian D for the heads-up]. Everything went well.. except the round metal rod that activated/deactivates the safety. I cannot get it out and don't want to force it.
It can only come forward.. but it won't come out.
Any tips?
Thx
Roberto S Siciliano is offline   Reply With Quote
Unread 06-01-2021, 05:43 PM   #2
Member
Jim DiSpagno
Forum Associate

Member Info
 
Join Date: Jul 2009
Posts: 1,840
Thanks: 5
Thanked 2,559 Times in 773 Posts

Default

The ferrule on top of the stock that the top tang bolt goes through screws out. Be careful not to damage it in the Procter. After that is removed, the safety actuation rod should come out.
Jim DiSpagno is offline   Reply With Quote
The Following User Says Thank You to Jim DiSpagno For Your Post:
Unread 06-01-2021, 05:56 PM   #3
Member
Roberto S Siciliano
Forum Associate

Member Info
 
Join Date: May 2021
Posts: 83
Thanks: 53
Thanked 22 Times in 14 Posts

Default

Quote:
Originally Posted by Jim DiSpagno View Post
The ferrule on top of the stock that the top tang bolt goes through screws out. Be careful not to damage it in the Procter. After that is removed, the safety actuation rod should come out.
Everything has been removed with exception of the actuation rod. It's the rod removal that I'm concerned about.
Based on your instruction, I should be able to pull the rod out.
Roberto S Siciliano is offline   Reply With Quote
Unread 06-01-2021, 05:58 PM   #4
Member
Holeshot
PGCA Member

Member Info
 
Join Date: May 2010
Posts: 700
Thanks: 1,660
Thanked 264 Times in 156 Posts

Default

reread Jims post
David Holes is offline   Reply With Quote
Unread 06-01-2021, 06:27 PM   #5
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 31,557
Thanks: 35,430
Thanked 33,039 Times in 12,321 Posts

Default

Doesn’t the safety actuation rod need to be removed before the ferrule can be rotated?





.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is offline   Reply With Quote
Unread 06-01-2021, 08:06 PM   #6
Member
B. Dudley
PGCA Lifetime
Member
 
Brian Dudley's Avatar

Member Info
 
Join Date: Aug 2011
Posts: 10,546
Thanks: 476
Thanked 17,411 Times in 4,591 Posts

Default

Other way around Dean.
__________________
B. Dudley
Brian Dudley is online now   Reply With Quote
Visit Brian Dudley's homepage!
Unread 06-01-2021, 08:23 PM   #7
Member
Roberto S Siciliano
Forum Associate

Member Info
 
Join Date: May 2021
Posts: 83
Thanks: 53
Thanked 22 Times in 14 Posts

Default

Quote:
Originally Posted by Brian Dudley View Post
Other way around Dean.
Brian

Should I try to gently pull the rod out with a needle nose?
Roberto S Siciliano is offline   Reply With Quote
Unread 06-01-2021, 08:52 PM   #8
Member
Breck Gorman
PGCA Member
 
Breck Gorman's Avatar

Member Info
 
Join Date: Jan 2012
Posts: 153
Thanks: 126
Thanked 697 Times in 116 Posts

Default

There are slots in the top of that tube. Use an appropriate sized screw driver to fit those slots without marring the wood. Unscrew it.
Breck Gorman is offline   Reply With Quote
The Following User Says Thank You to Breck Gorman For Your Post:
Unread 06-01-2021, 09:09 PM   #9
Member
Roberto S Siciliano
Forum Associate

Member Info
 
Join Date: May 2021
Posts: 83
Thanks: 53
Thanked 22 Times in 14 Posts

Default

Quote:
Originally Posted by Breck Gorman View Post
There are slots in the top of that tube. Use an appropriate sized screw driver to fit those slots without marring the wood. Unscrew it.
Success!
Thank you!
Roberto S Siciliano is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:36 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.