|
Notices |
Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and
You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register:
Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
|
|
Engraving restoration on a CHE 20 2 barrel set. |
|
07-06-2016, 05:00 PM
|
#1
|
Member
|
|
Member Info
|
Join Date: Aug 2011
Posts: 10,586
Thanks: 478
Thanked 17,550 Times in 4,623 Posts
|
|
Engraving restoration on a CHE 20 2 barrel set.
This CHE 20g. 2 barrel set is getting a full restoration and there is no point in doing so if all aspects of the gun do not look like new. And the engraving cannot be forgotten when it comes to such a job.
Too many times I see guns "restored" where the bare minimum is done by way of polishing as to not compromise the engraving. And the result sometimes is pitting still evident under the restored case colors.
The only way to make it right again is to do what it takes to get a like new surface and then recut the engraving, where needed, by the proper hand.
This CHE 20 was not in the best shape, it had a good amount of fine pitting and plumb patina on all the metal. The photos below show first the condition of the metal before/during polishing.
Then the condition of the frame after polishing. And finally after all the engraving was re-cut by Geoffroy Gournet.
True before photos. Not the best quality. But you get the idea.
Before 3.jpg
Before 2.jpg
Before 4.jpg
Starting of polishing. These were photos taken to document engraving before any was polished out.
Left Side 1.jpg
Right Side 1.jpg
Tang 3.jpg
Trigger Plate 1.jpg
Breech 2.jpg
These photos show the action after polishing is complete. Note the amount of engraving wiped out in order to get a true like new surface. Especially on the bottom.
Polished 2.jpg
Polished 4.jpg
Polished 3.jpg
Polished 3.jpg
Polished 1.jpg
These photos sow all the metal after the engraving was restored to like new.
IMG_8878.jpg
IMG_8879.jpg
IMG_8882.jpg
IMG_8883.jpg
IMG_8884.jpg
IMG_8888.jpg
IMG_8887.jpg
IMG_8886.jpg
__________________
B. Dudley
|
|
|
The Following 55 Users Say Thank You to Brian Dudley For Your Post:
|
Bill Holcombe, Bill Jolliff, Bill Murphy, Bill Zachow, Bob Hardison, Bob Jurewicz, Bob Roberts, Brett Hoop, Brian Hornacek, Chad Hefflinger, chris dawe, Craig Larter, Daryl Corona, Dean Romig, Eric Eis, Eric Estes, Erick Dorr, ForrestArmstrong, Frank Cronin, FRANK HALSEY, Fred Verry, Garth Gustafson, Gary Carmichael Sr, Gary Laudermilch, George Davis, George Lander, Harold Ward, Henry Verri, James J. Roberts, James L. Martin, Jim Wescott, John Cinkoske, Josh Loewensteiner, keavin nelson, Larry Stauch, Linn Matthews, Lloyd Bernstein, Louis Caissie, Mark Garrett, Mark Landskov, Martin Foss, Paul Ehlers, Ralph English, Rick Andrejat, Rob Marshall, Robert Rambler, Scott Janowski, scott kittredge, Stephen Hastie, Stephen Hodges, Steve Huffman, Tom Pellegrini, tom tutwiler, Wayne Owens, William Woods |
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -4. The time now is 09:18 AM.
Powered by vBulletin® Version 3.8.4 Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org Copyright © 2004 Design par Megatekno - 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.
|