Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Non-Parker Specific & General Discussions Damascus Barrels & Steel

Notices

Reply
Thread Tools Display Modes
Barrel evaluation
Unread 10-20-2013, 06:13 PM   #1
Member
Drew Hause
Forum Associate
 
Drew Hause's Avatar

Member Info
 
Join Date: Nov 2008
Posts: 2,082
Thanks: 323
Thanked 3,757 Times in 1,244 Posts

Default Barrel evaluation

Helped a fella in the Valley evaluate his (sadly) interesting FrankenParker yesterday:
1. Blued 12g Trojan action on a restock
2. Trojan steel barrels
3. Grade 3 D4 1891 barrels, matte blued but with a potentially stunning Damascus pattern showing through
4. 1903 Grade 3 D4 barrels, also blued and couldn't see the pattern.
I couldn't tell if they had been hot tank blued, but they had 4 weep holes drilled in the bottom rib
None of the above with matching SNs

The 2 Grade 3 barrels had the rib extension filed down to fit the Trojan rib extension slot, and the Trojan barrels were poorly fitted to the action.
The 1891 Grade 3 barrels had been cut, had what looked to be moderate pitting, and on checking the bore dimensions was found to have an about 1" bulge, 1" back from the muzzle on the right; but the bore gauge showed the bulge to be only .004" and the wall thickness was .024". It took some time, but I was able to get the brass stop of the Bill Henry wall thickness gauge into the bottom of the deepest pit, and it was only .002" with a wall thickness still .029".
The 1903 Grade 3 barrels had the chamber extended from 2 5/8" to slightly more than 2 3/4" but had apparently been honed. The left chamber wall thickness was .114 but the right only .100
And the short section of the rib with the rib extension had been rewelded. Interestingly it had the nicest 'chime' of any barrels I've ever rung.
The Grade 3s were 2 frame barrels, and despite bores of .736 had wall thicknesses 9" from the breech of .045" and 9" from the muzzle of .030".

My point is that (almost) NO 100 year old barrel is now as it left Meriden, and without the proper tools it is impossible to adequately evaluate the barrels. AND it takes a long time to do it right. It is not easy to eye-ball the pit, rotate the barrels in the proper position, and try to get the brass stop in the bottom of the pit.
The entire process took about 90 minutes.

I advised the fella NOT to shoot the barrel with the borderline chamber without an additional evaluation by a barrel specialist, to send the other D4 barrel for proper refinishing, and to get the Trojan barrel properly fit to the receiver. I thought repair of the minimal bulge at the muzzle was optional.

Last edited by Drew Hause; 10-20-2013 at 11:46 PM..
Drew Hause is offline   Reply With Quote
Visit Drew Hause's homepage!
Unread 10-23-2013, 04:42 PM   #2
Member
John Farrell, Charter Member #33
Forum Associate
 
John Farrell's Avatar

Member Info
 
Join Date: May 2010
Posts: 335
Thanks: 100
Thanked 141 Times in 78 Posts

Default

Sounds like the time a friend of mine told me his girlfriend was a little bit pregnant.
John Farrell is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:50 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.