Re-barreling Parker PH

[Dylan Rhodes]

Originally Posted by Dean Romig

A word to the wise to anyone attempting to see if one set of barrels will fit a different Parker - Remove the Cocking Hook before you try. *** the voice of experience ***





.

A question from the unwise - why?

I believe you and If i ever do I will, but what “”experience” did you experience?

[Dean Romig]

The hook wouldn’t allow the barrels to be ‘disconnected’ from the frame. I had to remove the stock and remove the floor plate in order to release the cocking hook from the cocking crank.
Not a fun project when all the while I was berating myself for thinking it would be okay just this once...





.

[Dylan Rhodes]

Originally Posted by Dean Romig

The hook wouldn’t allow the barrels to be ‘disconnected’ from the frame. I had to remove the stock and remove the floor plate in order to release the cocking hook from the cocking crank.
Not a fun project when all the while I was berating myself for thinking it would be okay just this once...





.

Thanks as always Dean

[Mike of the Mountain]

If you can find bbls that are close to what you need then buy them and have them fit. I'd have the compromised bbls sent to Briley for full length tubes and then you'll have a fun two bbl set. Enjoy them, these guns were made to shoot!!