28 gauge 5/8oz.

[gman]

Does anyone have a 5/8oz 28gauge recipe for winchester AAHS hulls they would be willing to share? My current powder supply is long shot, and international. Also load 800x when available. It is for a repro so very low pressure is desirable but not a real necessity.
Thanks

[William Davis]

No one has answered on the 28 and don't see any published data with 5/8 oz

I look for the lightest published loads that are just a bit over over my chosen shot weight. Back off one shot & powder bushing size see how it shoots.

For example I shoot 3/4 oz in a 12 G. # 1 Frame Damascus Parker GH. No published 3/4 oz data using Red Dot, only powder I can get. Lightest Alliant recomended load with Red Dot is 7/8 oz shot 16.5 Grs

Backed off one bushing power and shot loaded 3/4 oz and 15.7 Red Dot. Works great burns clean. Over published risky, under just a bit not so risky. I did fire the first few in a Remington 870 just to be sure.


William

[Holeshot]

WILLIAM I WOULD LOAD LIGHTER YET, small bores develop more pressure then larger bores. I have experimented with different powders before and less is always better to start with. Load a box of light loads and you will be impressed