Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
I just received test results for a Blue Dot waterfowl load (using bismuth). The load has: (1) a 10 gauge Remington (green) hull (cut to 2 7/8''); (2) a Winchester 209 primer; (3) 35.0 grains of Blue Dot; (4) an SP-10 wad; (5) 1/4'' 16 gauge fiber filler in the wad cup; (6) 1.25 ounces of #4 bismuth; and (7) a 6 point fold crimp. The average velocity was 1143 fps and the average pressure was 6317 psi.
The Following 7 Users Say Thank You to Victor Wasylyna For Your Post:
Short Ten Blue Dot Load: Test Results
Threaded Mode