|
12-13-2017, 04:11 PM | #3 | ||||||
|
Paul,That is typical of 1/2 frame guns.
__________________
"Much care is bestowed to make it what the Sportsman needs-a good gun"-Charles Parker |
||||||
The Following 4 Users Say Thank You to Dave Suponski For Your Post: |
12-13-2017, 04:55 PM | #4 | ||||||
|
|
||||||
12-13-2017, 05:58 PM | #5 | ||||||
|
That is the first tims i have seen an example of that marking on the tang of a hammerless Parker. The only other example i have seen of an actual frame size marking on frames is on a frew hammer gun frames of 3 and 4 size have had these numbers stamped on them.
This marking makes sense as to avoid factory confusion with 0 frames aince they are similar.
__________________
B. Dudley |
||||||
The Following 2 Users Say Thank You to Brian Dudley For Your Post: |
12-13-2017, 06:18 PM | #6 | ||||||
|
Eric, I see this mark on 1/2 frame guns only.
__________________
"Much care is bestowed to make it what the Sportsman needs-a good gun"-Charles Parker |
||||||
The Following 2 Users Say Thank You to Dave Suponski For Your Post: |
12-14-2017, 10:25 AM | #7 | ||||||
|
I've had several Parkers apart and haven't noticed any frame size markings until I came across this one. I looked the parker story over along with some other sources and have found no mention of this stamp for 1/2 frame I.D. Is there anyway to archive this information for easily accessible reference?
|
||||||
|
|