new find

jonny davis · 01-02-2010, 05:44 PM

I have found a Parker bro's gun in a storage unit sale. The gun is stamped Parker bro's maker meridian conn. laminated steel on the rib between the barrels. I also see the numbers 65 on what I have been told is the water table. The same number is also on the under side of the barrels where it connects to the stock. There are no other numbers anywhere. The gun is the lifter model. I have read some about the history of the Parker gun and I think I can place the era it is from, however I'm not sure how to put a value on it or determine the serial number. Any advise would be appreciated. Thanks Jonny

To view pictures - click on link

http://picasaweb.google.com/jdavsbui...XhiJ_D3Yzj5wE#

Autumn Daze · 01-02-2010, 06:19 PM

Jonny,Post some high resolution photo's and we can help you out.

jonny davis · 01-02-2010, 07:05 PM

THANKS FOR YOUR REPLY. I'LL SEE IF I CAN GET SOME PICTURES ON SOON.

jonny davis · 01-02-2010, 08:37 PM

link to pictures has been posted

Dean Romig · 01-02-2010, 11:28 PM

What I find most interesting is the wear plate added to the locking lug.

Autumn Daze · 01-03-2010, 09:43 AM

Jonny,Thnk you for posting the picture's.This gun Parker Bros. serial number 65 is or was a back action deluxe grade gun.I say deluxe because there is evidence of checkering and some engraving. It,s an interesting gun and important in the aspect that it is a very low serial number gun.Unfortunetly the condition reduces the gun to just about that.

Dean,That is the soldered in wear plate that Parker used when they devised the 12 1/2 degree locking bite.This is the precussor to the 1910 patent bolt plate.

Dean Romig · 01-03-2010, 10:02 AM

It must have been sent back to Meriden for that. Too early to have been made with it.

Autumn Daze · 01-03-2010, 10:18 AM

Ya Dean,You are correct.The tapered bolt plate came about in 1874/1875.Also the lifter extension was eliminated at the same time as the bolt plate change.What is interesting about this gun is the fact that the bolt plate was retrofitted but not the lifter extension.

Dean Romig · 01-03-2010, 10:25 AM

Can we presume this gun went back right between those two improvements?

Autumn Daze · 01-03-2010, 10:27 AM

I believe the two improvement's transpired concurrently. But then again "never say never".