Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums Parker Restoration

Notices

Reply
Thread Tools Display Modes
A Grade Restoration Query
Unread 11-11-2018, 11:48 PM   #1
Member
Corey Barrette
PGCA Member
 
Corey Barrette's Avatar

Member Info
 
Join Date: Nov 2016
Posts: 128
Thanks: 177
Thanked 462 Times in 63 Posts

Default A Grade Restoration Query

I’m looking into purchasing an A grade that appears to be an all original gun but could use some work. It needs re-stocking and the screws need to be replaced as they’re pretty buggered. Will be taking the gun to my smith for further evaluation and condition of the barrels/bores. However, they look clean; no visible pitting. Any opinions related to the restoration work and/or recommendations related to who may do the work should I ‘pull the trigger’ on this one would be greatly appreciated. Seems an interesting gun to me. That said I’m not too familiar. Appreciate any advice. Thanks.

Last edited by Corey Barrette; 11-11-2018 at 11:59 PM.. Reason: clarity
Corey Barrette is offline   Reply With Quote
The Following 6 Users Say Thank You to Corey Barrette For Your Post:
A Grade Restoration Query (2)
Unread 11-11-2018, 11:55 PM   #2
Member
Corey Barrette
PGCA Member
 
Corey Barrette's Avatar

Member Info
 
Join Date: Nov 2016
Posts: 128
Thanks: 177
Thanked 462 Times in 63 Posts

Default A Grade Restoration Query (2)

Additional pics.
Corey Barrette is offline   Reply With Quote
The Following 5 Users Say Thank You to Corey Barrette For Your Post:
Unread 11-12-2018, 01:44 AM   #3
Member
Robert Delk
Forum Associate

Member Info
 
Join Date: Jun 2009
Posts: 486
Thanks: 1
Thanked 124 Times in 87 Posts

Default

Gotta be one of a kind engraving.Would love to see it in person.
Robert Delk is offline   Reply With Quote
Unread 11-12-2018, 03:39 AM   #4
Member
Frank Childrey
PGCA Member

Member Info
 
Join Date: Jun 2009
Posts: 58
Thanks: 29
Thanked 38 Times in 21 Posts

Default

I'd sure like to see a letter on that one.
Frank Childrey is offline   Reply With Quote
Unread 11-12-2018, 07:00 AM   #5
Member
Corey Barrette
PGCA Member
 
Corey Barrette's Avatar

Member Info
 
Join Date: Nov 2016
Posts: 128
Thanks: 177
Thanked 462 Times in 63 Posts

Default

I’ve sent in a request. In any case, it will help me and the current owner understand more about its provenance.
Corey Barrette is offline   Reply With Quote
Unread 11-12-2018, 07:59 AM   #6
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 32,015
Thanks: 36,635
Thanked 34,093 Times in 12,620 Posts

Default

An extremely unusual Parker in so many respects.

Engraved wedges like that on Damascus barrels is only the second example I have ever seen.

It wouldn’t surprise me to learn that grip cap may well have been done by Parker on special order. Are those letters “CSA”?

The relief engraving is also highly unusual and while we have seen others with similar engraving they are very few.

If you’re thinking it needs restocking because of that fractured wrist, think again.
If no pieces are missing, an artist like David Trevallion or Brian Board should be consulted. It could be saved and the repair made both strong and invisible - and you would maintain the originality of the gun.





.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is offline   Reply With Quote
The Following 10 Users Say Thank You to Dean Romig For Your Post:
Unread 11-12-2018, 08:53 AM   #7
Member
Mike McKinney
PGCA Lifetime
Member

Member Info
 
Join Date: Jul 2009
Posts: 358
Thanks: 2,801
Thanked 505 Times in 193 Posts

Default

I agree with Dean, explore a repair before you commit to a restock.
Mike McKinney is offline   Reply With Quote
The Following 9 Users Say Thank You to Mike McKinney For Your Post:
Unread 11-12-2018, 09:58 AM   #8
Member
Bill Mullins
PGCA Invincible
Life Member

Member Info
 
Join Date: Nov 2008
Posts: 218
Thanks: 2,483
Thanked 1,076 Times in 170 Posts

Default

It appears you are looking at a AAH grade gun rather than a AH grade.
A 7 is stamped on the barrel flats and barrel beading is that of a AA grade. Trigger guard piercing also normally just seen on grade 7 & 8 grades.
Keep it ALL original as much as possible! 🤗😊
Bill Mullins is offline   Reply With Quote
The Following 9 Users Say Thank You to Bill Mullins For Your Post:
Unread 11-12-2018, 10:03 AM   #9
Member
Kensal Rise
PGCA Member

Member Info
 
Join Date: Sep 2011
Posts: 1,769
Thanks: 607
Thanked 2,577 Times in 926 Posts

Default

Mr. Barrette:
There has GOT to be a great story behind this gun! Please do NOT restock it. Have the existing wood repaired. The craftsmen already mentioned are superb. So is the Brad Bachelder shop.

The history and story behind the original owner of this Parker will certainly be well worth the effort. It's history, just waiting to be discovered!
John Campbell is offline   Reply With Quote
The Following 4 Users Say Thank You to John Campbell For Your Post:
Unread 11-12-2018, 10:36 AM   #10
Member
Mills
PGCA Lifetime Member
Since 3rd Grade
 
Mills Morrison's Avatar

Member Info
 
Join Date: Nov 2011
Posts: 10,384
Thanks: 14,448
Thanked 12,498 Times in 4,472 Posts

Default

Lots of good advice here. I will add that IF you restock it, keep the old stock with it
Mills Morrison is offline   Reply With Quote
The Following User Says Thank You to Mills Morrison For Your Post:
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:46 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.