|
07-14-2020, 10:31 AM | #3 | ||||||
|
Most of us don't need so much quantity. Craig, why don't you take on unsized shells to swage? I would send you mine when I need them. What would be a fair price for sizing 50 or 100 plus shipping?
|
||||||
07-14-2020, 11:37 AM | #4 | ||||||
|
I like it! You can lay a cot out next to the bench and lay on your side and reload!!
|
||||||
07-14-2020, 12:51 PM | #5 | ||||||
|
I need to get the swaging setup. That is what I lack.
|
||||||
07-14-2020, 01:35 PM | #6 | ||||||
|
Craig, are you pushing the hull down through a sizing die screwed into the 1 1/4x 8 threaded hole in the top of the press?
The swaging tool I have has two dies, to take it down in two steps rather than one. The Shell holder fits into the ram of the RCBS Rock Chucker, and the die threads into the top. On top of the die is the punchout handle. |
||||||
The Following User Says Thank You to edgarspencer For Your Post: |
07-14-2020, 06:30 PM | #7 | ||||||
|
I don’t need a cot , the office chair I have sleeps very well . When my Boykin was still little she’d lay on my chest in that chair and we’d both take a nap .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
07-14-2020, 06:37 PM | #8 | |||||||
|
Quote:
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
|||||||
07-14-2020, 06:40 PM | #9 | ||||||
|
To be honest the cost of the tooling to keep an 8 going to my satisfaction kept me away from it for several years before I succumbed . I also thought getting the 8 gauge press was going to take longer , but from the day I told him I wanted a press , it was in my hands in about two weeks if my memory serves .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
07-14-2020, 11:20 PM | #10 | ||||||
|
my first 8 ga resizer was a pair of conduit pliars...did not make pretty shells but worked for me a few years...my second resizer was one made from a blue print that wayne gave me...a friend to it to a machine shop and gave it to me it works perfect...it makes a factory looking hull in one step on my press which is some kind of a piece of machineary my dad picked up some where... any way I roll crimp my 8 ga loads but gona try to get me a 6 crimp for the 8 ga...charlie
|
||||||
|
|