Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Non-Parker Specific & General Discussions Damascus Barrels & Steel

Notices

Reply
Thread Tools Display Modes
Cut barrels and regulation?
Unread 02-17-2020, 01:07 PM   #1
Member
78CJ
PGCA Member

Member Info
 
Join Date: Sep 2018
Posts: 45
Thanks: 5
Thanked 54 Times in 13 Posts

Default Cut barrels and regulation?

So, last week I met with a local gunsmith who has the correct equipment and a thorough knowledge of vintage doubles to take a look at my barrels. MWT looked great.

The barrels had been cut from 28" to 26 5/8" which I already knew.

Yesterday I took the GH 12 Gauge for a walk around and afterwards decided to shoot each barrel with RST Lite 2 1/2" #7's. Mind you, this was offhand at 25 yards but I was really surprised to see the right barrel print about 12" right and the left barrel print about 12" left. Will being cut have anything to do with this? I realize a sample of one each barrel isn't much but height was identical and I have shot offhand with others to pattern and have not had any trouble. Right barrel still had about .010 constriction and the left had about .020 and both were evident on paper.

Ryan
Ryan Brege is offline   Reply With Quote
The Following User Says Thank You to Ryan Brege For Your Post:
Unread 02-17-2020, 01:16 PM   #2
Member
mobirdhunter
PGCA Lifetime
Member
 
Garry L Gordon's Avatar

Member Info
 
Join Date: Jul 2013
Posts: 1,715
Thanks: 4,862
Thanked 2,861 Times in 1,019 Posts

Default

Barrels were regulated to shoot to a specific point, and cutting them can mess this up as you may have discovered.
__________________
“Every day I wonder how many things I am dead wrong about.”
― Jim Harrison
"'I promise you,' he said, 'on my word of honor, I won't die on the opening of the bird season.'" -- Robert Ruark (from The Old Man and the Boy)
Garry L Gordon is offline   Reply With Quote
Unread 02-17-2020, 01:31 PM   #3
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 25,267
Thanks: 23,566
Thanked 22,372 Times in 8,765 Posts

Default

Cutting the barrels by only 1 3/8” should not have caused that.

Try various shot sizes, different powders - several different load recipies until you find one that prints where it is supposed to.

I have had Parkers with cut barrels as much at 4” and never experienced anything like you describe.





.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me,
a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is online now   Reply With Quote
The Following 2 Users Say Thank You to Dean Romig For Your Post:
Unread 02-20-2020, 06:04 PM   #4
Member
J.B. Books
PGCA Member
 
Pete Lester's Avatar

Member Info
 
Join Date: Jun 2009
Posts: 2,407
Thanks: 1,166
Thanked 3,575 Times in 1,046 Posts

Default

I would suggest the next step would be putting the gun in a gun vise and shooting some patterns into a 30" circle at 40 yards. Vicing the gun will take the human factor out of the equation, then you can go from there.
__________________
"All paid jobs absorb and degrade the mind" Aristotle
Pete Lester is offline   Reply With Quote
The Following 2 Users Say Thank You to Pete Lester For Your Post:
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:51 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2020, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.