Parker Gun Collectors Association Forums  

Go Back   Parker Gun Collectors Association Forums Parker Forums Parker Reproductions

Notices

Reply
Thread Tools Display Modes
Load Limit for 3" Repro
Unread 05-28-2020, 11:12 AM   #1
Member
Rud Blumentritt
PGCA Member

Member Info
 
Join Date: Apr 2013
Posts: 37
Thanks: 12
Thanked 77 Times in 14 Posts

Default Load Limit for 3" Repro

I would like some information on what are considered acceptable loads for a 20gauge Repro. Obviously there are some guns chambered for 2-3/4" and others chambered for 3" shells. Other than the barrel length and choke I can't tell a lot of difference. So my question is - what is the reasonable load limit in the 3" guns? Would any modern factory load be reasonable? If not, what would be considered the max load/velocity? My understanding is that the concern is not the chamber or barrel, but rather the stock being eventually damaged/broken. Thanks!
Rud Blumentritt is offline   Reply With Quote
Unread 05-28-2020, 05:04 PM   #2
Member
Bill Murphy
PGCA Lifetime
Member Since
Second Grade

Member Info
 
Join Date: Jun 2009
Posts: 15,524
Thanks: 6,119
Thanked 8,784 Times in 4,718 Posts

Default

A reasonable load limit for a 3" 20 gauge Repro would not include any 3" shell. Just my opinion though. Others may differ.
Bill Murphy is offline   Reply With Quote
The Following 6 Users Say Thank You to Bill Murphy For Your Post:
Unread 05-28-2020, 05:36 PM   #3
Member
Reggie B
PGCA Lifetime
Member
 
Reggie Bishop's Avatar

Member Info
 
Join Date: Dec 2011
Posts: 2,490
Thanks: 2,936
Thanked 3,436 Times in 1,366 Posts

Default

I agree with Bill. I often wonder why individuals want to shoot the high powered stuff, even in modern guns. Low recoil shells will do the job if the aim is correct.
__________________
"A man who carries a cat by the tail learns something he can learn in no other way."
Reggie Bishop is offline   Reply With Quote
The Following User Says Thank You to Reggie Bishop For Your Post:
Unread 05-28-2020, 06:27 PM   #4
Member
Kevin McCormack
PGCA Lifetime
Member

Member Info
 
Join Date: Jun 2009
Posts: 2,006
Thanks: 1,219
Thanked 3,599 Times in 1,016 Posts

Default

The 3-inch shells normally used by people in 20 ga. guns (mostly for waterfowl hunting) are some of the worst patterning loads commercially available. Unless shooting an autoloader, the recoil of a 3-inch 20 used in the standard weight spectrum of fixed-breech upland guns (e.g., 5 1/2-6 1/2 lbs.) will REALLY get your attention! There are so many truly superior 2 1/2- and 2 3/4 inch shells on the market (RST, B&P, Gamebore, Fiocchi) I can't imagine why anyone would go to a 3-inch gun in a 20 unless for a truly dedicated purpose like turkey (live or card) shooting.
Kevin McCormack is online now   Reply With Quote
The Following 4 Users Say Thank You to Kevin McCormack For Your Post:
Unread 05-28-2020, 06:38 PM   #5
Member
edgarspencer
PGCA Member
 
edgarspencer's Avatar

Member Info
 
Join Date: Sep 2011
Posts: 6,056
Thanks: 2,905
Thanked 11,391 Times in 3,073 Posts

Default

I was 30 when I got my Winchester 101. I bought a box of 3" Winchester shells. There are 21 shells left, and they're 42 years old. Do the Math:
(30 x 101 / 3)/ (21/42) = Cost of a new Stock
Your results may vary
edgarspencer is online now   Reply With Quote
The Following 5 Users Say Thank You to edgarspencer For Your Post:
Unread 05-28-2020, 06:44 PM   #6
Member
Rud Blumentritt
PGCA Member

Member Info
 
Join Date: Apr 2013
Posts: 37
Thanks: 12
Thanked 77 Times in 14 Posts

Default

The gun would have many uses, including, to Kevin's point, going after turkey which could require moving to a heavier (3") load to provide sufficient pattern density to kill a turkey at a given distance. So I am trying to see if anyone has information that would indicate what the makers of these guns considered a reasonable load when they offered a 3" model. I have seen the term "overload proved" on the barrels of these guns, but have no idea what that means. Thanks!
Rud Blumentritt is offline   Reply With Quote
Unread 05-28-2020, 09:05 PM   #7
Member
John Allen
PGCA Lifetime
Member
 
John Allen's Avatar

Member Info
 
Join Date: Mar 2010
Posts: 582
Thanks: 2
Thanked 1,599 Times in 342 Posts

Default

The Parker repro barrels with shoot any current factory load safely.I think the max load for the 3" 20 is 13/8 oz of shot and 31/2 dram of powder.As others have said,it will kick you out from under your hat and pattern horribly.The 3" 20 is also a slow load that throws a long shot string.The gun can handle the max load,but you will hit more and kill more with a 7/8 oz load.
John Allen is offline   Reply With Quote
The Following 7 Users Say Thank You to John Allen For Your Post:
Unread 05-28-2020, 09:20 PM   #8
Member
Dean Romig
PGCA Invincible
Life Member
 
Dean Romig's Avatar

Member Info
 
Join Date: Dec 2008
Posts: 31,558
Thanks: 35,431
Thanked 33,040 Times in 12,321 Posts

Default

All of the advice you have received here is spot on!

The 3" 20 gauge loads do NOT pattern well. Useless for turkeys where your target size is about that of a tangerine and the holes in the patterns of most commercial 3" shells are two and three times the size of that tangerine. And for turkeys you don't need the kind of earth scorching power those shells produce. All you need is a pheasant load of #6 or #7 shot at distances under thirty-five yards.

Further, Parker Reproductions don't have the best reputation in the category of stock strength.





.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."

George King, "That's Ruff", 2010 - a timeless classic.
Dean Romig is offline   Reply With Quote
The Following 2 Users Say Thank You to Dean Romig For Your Post:
Unread 05-29-2020, 09:18 AM   #9
Member
Rud Blumentritt
PGCA Member

Member Info
 
Join Date: Apr 2013
Posts: 37
Thanks: 12
Thanked 77 Times in 14 Posts

Default

Thanks for all that posted. This is all good information and very helpful! Thanks!
Rud Blumentritt is offline   Reply With Quote
The Following User Says Thank You to Rud Blumentritt For Your Post:
Unread 05-29-2020, 12:51 PM   #10
Member
tom tutwiler
Forum Associate
 
tom tutwiler's Avatar

Member Info
 
Join Date: Jun 2009
Posts: 675
Thanks: 393
Thanked 743 Times in 223 Posts

Default

The new monster 3" 20 Gauge turkey loads carry over 1 1/2 oz of shot and they kill at both ends. I do shoot them out of a modern 870. Can't imagine shooting them out of a repro. As I call during the time period Repro's were made, that the normal payloads were 1 1/4 oz out of the 3" shell.
tom tutwiler is offline   Reply With Quote
The Following 2 Users Say Thank You to tom tutwiler For Your Post:
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:53 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Parkerguns.org
Copyright © 2004 Design par Megatekno
- 2008 style update 3.7 avec l'autorisation de son auteur par Stradfred.