![]() |
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#23 | ||||||
|
![]()
That wad that I pulled out and pictured is marked Gulandi Italy on the inside, and the number 29. The measurements match the ballistics products number CS12S. They list that wad as being for 2-3/4" shells, but if that is what came out of the RST, then that is what I will put back in.
__________________
B. Dudley |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#24 | ||||||
|
![]()
Brian;
I'm pretty sure that that wad can be used in a 2 3/4" hull. Best to call Ballistic products to confirm. They are great to deal with. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#25 | |||||||
|
![]() Quote:
http://www.ballisticproducts.com/Tar...s/products/86/ The first pic below is the pic you posted, the 2nd pic is a CS12S and the 3rd pic is a CS12 Competition Special.
__________________
Wild Skies Since 1951 |
|||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#26 | ||||||
|
![]()
I reload a 2-1/2" 12 ga. to match the RST Lite shells. I've talked to Morris at RST and he would not divulge the load or manufacturer of the powder. I totally understand his reason and now I feel bad I even asked him. He has liability issues none of us even think about.
I do however use a load of my own concoction. It works very well in Vintage guns and generates between 1150 and 1180 fps . I use 22 grs. Of IMR PB, a 12ga Winchester gray wad for 7/8oz., WW209 primers. All shot sizes work well I like #9 or #8s for skeet targets and #7-1/2 for Sporting Clays. I also use a Spolar loader which I had set up for 2-1/2” shells. Hope this helps. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#27 | ||||||
|
![]()
Mr. Rich... I just got a 1929 A.H. Fox Sterlingworh that has replaced my wife. I indeed am in Love.. I have been shooting RST Shells and am in need of some low pressure,low recoil loads... I saw you sent some to another gentleman and I would certianly use any loads you might share with me. I shoot everything from Quail.Dove, skeet and ducks. Thanks
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#28 | ||||||
|
![]()
What gauge and what length shells are you using? ALL my shells are the 2.5 inch.
__________________
There is no hunting like the hunting of man, and those who have hunted armed men long enough and liked it, never care for anything else thereafter...Earnest Hemingway |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#29 | ||||||
|
![]()
12 Gauge 2 1/2 inch for old vintage sxs...
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#30 | ||||||
|
![]()
they are rst hulls
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
|