|
10-15-2019, 06:14 AM | #13 | ||||||
|
When my shotguns get real dirty, I use the home made Ed's Red (YouTube). Acetone is the ingredient that gets rid of the plastic residue. Automatic transmission fluid is a great rust preventative. A copper scouring pad wrapped around a bore brush make the scrubbing easy and quick. A couple of patches followed by an oil patch and I'm done. Shiny bores every time.
|
||||||
The Following 3 Users Say Thank You to Allen Gill For Your Post: |
10-15-2019, 08:36 AM | #14 | ||||||
|
It probably isn’t the powder used by RST, but the effects of low pressure. Higher pressure loads burn propellant more completely than lower pressure loads.
|
||||||
The Following 2 Users Say Thank You to Ed Blake For Your Post: |
10-15-2019, 01:47 PM | #15 | ||||||
|
The excess residue is caused by not burning all of the powder.The modern hot loads get additional velocity by using powders that burn almost completely.That is why they leave the barrels cleaner looking.Another problem with modern Hoppes #9 is that they have reformulated it and it is not as strong as it used to be.As Horace would say "they took the animosity out of it."I bought a full bottle of the old stuff at an antique mall of all places.when you opened it,the odor hit you.It smells like a gun.The new stuff just ain't the same.
|
||||||
The Following 7 Users Say Thank You to John Allen For Your Post: |
10-16-2019, 07:45 AM | #16 | ||||||
|
I have found a product that changes the cleaning game! I own Shooting Stars Firearms and had a sales call one day. This is a local company in Youngstown Ohio and I have heard it all about magic concoctions, the sales man was lucky it was a slow day. Anyway he left a sample bottle and smiled. We were shooting 410-s about that time and was having the same trouble as this thread talks about. After 100 rounds of good 410 ammo I could hardly get a brush down the tubes. Lead, plastic, that would not come out! Thinking about the sales pitch and magic juice I read the bottle and started the project. First....the barrels had to be clean and free of any fouling. Worked at that a good hour or so.....O.K. Treat the barrels with a clean wet cloth of the clear juice making sure to give it some stokes. O.K. Now follow with a dry patch and buff the tubes dry. I then put gun aside till next shoot. So I takes the gun out to the clays range...forgot about the magic juice job and shot my rounds. At the cleaning bench I removed the barrels and had to take a 2nd look to make sure this was the gun I had just shot! The barrels only had some loose speckles of fouling that could be wiped out with one pass....dang stuff works!!! Look up Gun 21 on face book. Made for a dry lube on M-16 rifles. In the shop we sell a small bottle that last a long time for 10.00 It can be sent in regular mail as it is not flammable. Its all I use on all my gun barrels now, perfect for black powder too....(-: After the first good cleaning all is needed is a fresh wipe and buff and maybe a little work at the cones with a clean dry brush as they may have a little streaking in the 410 gun, but very minor...good to go. This is the best stuff I have found so far! SXS Ohio
|
||||||
The Following 3 Users Say Thank You to Kenny Graft For Your Post: |
10-16-2019, 08:58 AM | #17 | ||||||
|
Hallelujah! Thanks all!
|
||||||
10-16-2019, 12:25 PM | #18 | ||||||
|
I believe stainless steel tornado brushes should not be used in vintage barrels. The brass brushes work great
https://www.amazon.com/Pro-Shot-12-G.../dp/B00CFYAPR2 I use a gauge larger to scrub the chamber and into the forcing cones. Leaving the cleaning solution to sit after one pass is the key, then another scrub.
__________________
http://sites.google.com/a/damascuskn...e.com/www/home |
||||||
The Following 2 Users Say Thank You to Drew Hause For Your Post: |
10-16-2019, 12:30 PM | #19 | ||||||
|
To determine bore residue composition push a clean patch through your dirty bore. Light the patch’s corner and watch it burn. Unburned powder will Fizz, soot won’t .
William |
||||||
10-16-2019, 12:38 PM | #20 | ||||||
|
I am not a member of Facebook. Kenny is Gun 21 the name of the product? I googled but did not find.
|
||||||
|
|