![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
Yes on right side of the hook it's chipped..
I will post picture so all can see better the problem. Thanks |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
Picture of broken cocking hook
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
I would think that it could be welded back to size and then filed to fit.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]()
I am sending to gunsmith in East Ellijay
to see what he can do..if not repairable then I will know size and be on the hunt for another |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#7 | ||||||
|
![]()
Yes, the hook would likely continue to operate just fine for a time the way it is.
But it should be replaced as it is damaged. If you need a replacement, contact me, I have several of them. They are the same as the ones used in the doubles and are the same within most all frame sizes.
__________________
B. Dudley |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to Brian Dudley For Your Post: |
![]() |
![]() |
![]() |
#8 | ||||||
|
![]()
Thanks so much
PAT |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|