![]() |
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]() |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
The two 20 ga. IC/M barrels I measured are identical at 13 & 19 mils.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
That is why I look for the Q1 and Q2 chokes in the 28GA. Perfect for grouse!!!!
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]()
Hello - I measured up my 12 ga. 2-bbl set when I bought it. Here's how the chokes actually measure:
28" M/F: Bore .735 R=.010 (IC) L=.035 (F) 26" IC/M: Bore .735 R=.008 (Skt) L=.012 (IC) I was told by its previous owner that they are unaltered and the tapers all measure about 2". It is what it is and I actually like the set up. The 28" bbls are great in the dove field and the 26" bbls work well for grouse/woodcock. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#7 | ||||||
|
![]()
Since it wasn't mentioned by the other posters, I will "mention" that the full choke constriction of my 28 gauge Repro is .039. I have no idea how the wad gets out of the barrel. Some day, I will shoot patterns with that barrel and report back. Parker Brothers full choke 28 gauge is .020. It will kill a single quail at 45 yards through brush. Our member Tom Flanigan witnessed that shot. He objected to my attempt to find the bird, so I sent my Wirehair, Eva, into the brush and she came out with the bird.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#8 | ||||||
|
![]() Good Grief man - that's a full choke measurement on a 12 gauge gun!! Do you check for bulges after every shot with that gun? How long is that choke boring? .
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#9 | ||||||
|
![]()
My 26" IC/M marked 20ga Bbls are:
IC/Right tube =0.016 or Mod to Imp Mod (0.624 bore) M/Left tube = 0.018 or Imp Mod (0.619 bore) The Kreighoff 28" 16ga Bbls I got from Tony are: Right tube =0.019 or Imp Mod (0.671 bore) M/Left tube = 0.030 or full+ (0.670 bore) |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
28 repro choke bore | ![]() |
![]() |
#10 | ||||||
|
![]()
On my 2 barrel 28ga. 26" IC/M .005 and .015; 28" M/F .015 and .035 yes, .035! I've not patterned it yet.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
|