Book is at office

[TxHuntermn]

A little help for 48327

Thanks in advance.

[Randy Roberts]

PT T O C 12 30

[TxHuntermn]

Thanks Randy.....same oid story....gun not cut...but in this case 30 to 26"

[Mills]

Yep, with 26 inches the burden is on the seller to prove to me it is not cut

[TxHuntermn]

shame, it is a 1 frame top lever hammer...if original 26" it would have gotten some play!

[charlie cleveland]

i remember a time when a 26 inch barrel was the thing to have for bird hunting...quail that is...charlie

[Mills]

26 inches is still a good length for quail hunting. 26 and 28

[Milton C Starr]

Originally Posted by Mills Morrison

Yep, with 26 inches the burden is on the seller to prove to me it is not cut

The great thing about Parkers is the wealth of information available .
One I was looking at , the barrels looked off so I pm'd one of the members here the serial number. It was missing 4" off the barrels which wasnt mentioned in the description the seller had .

[Robert Brooks]

I bought my first 20 ga Parker way back and i learned later it had been cut from 30 to 26 inches and was a beautiful DHE. Bobby

[Randy Roberts]

Originally Posted by Robert Brooks

I bought my first 20 ga Parker way back and i learned later it had been cut from 30 to 26 inches and was a beautiful DHE. Bobby

Thanks to the PGCA and its members unfortunate incidents like that are most often times avoided now. At least for the PGCA members anyway.