![]() |
![]() |
![]() |
||||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
Yes, wall thickness is .035+ on both. This gun hasn't been shot in well over 100 years and most likely shot for a few years after manufactured. Thanks
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
It sounds like a very nice gun in high condition. Can you share some pictures of it?
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#5 | ||||||
|
![]()
I posted info about it a month or two ago. Just search my post.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#6 | ||||||
|
![]() |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#7 | ||||||
|
![]()
Thanks - I remember that thread. Nice Parker.
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#8 | ||||||
|
![]()
John, I load 16.2 grains of PB in my 16 gauge loads. If you are using a MEC that would be a # 25 bushing. I throw 1 oz of shot.
__________________
"Much care is bestowed to make it what the Sportsman needs-a good gun"-Charles Parker |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#9 | ||||||
|
![]()
They are brass shells, so I am thinking of 21.5, ¾ oz. since there is no crimp, I am assuming pressures will be lower. Thanks
|
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
#10 | ||||||
|
![]()
John, I just checked my brass loading info. You should have a great load there at 21.5 grains.
__________________
"Much care is bestowed to make it what the Sportsman needs-a good gun"-Charles Parker |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
|