View Single Post
Unread 08-13-2017, 12:44 PM   #16
Member
Eric Johanen
Forum Associate

Member Info
 
Join Date: Jan 2015
Posts: 113
Thanks: 344
Thanked 73 Times in 40 Posts

Default

CL. how are your crimps with this wad column? How deep are you seating the SP10 wad? I found that using a 16 ga. lubed 1/2 inch fiber filler with a .125 nitro card in the wad cup gives me perfect crimps with no dishing. Without the .125 card I found I had dished crimp with some open centers. I am asking only because your .375 filler is quite a bit shorter than my fiber/nitro card filler combination. I had my 1881 Greener out today on the clays course using both Cheddite and Federal hulls and crushed the clays. No large chips and most were vaporized. The 19 grains of Red Dot with an ounce and a eighth of 7.5 shot works very well. Works nicely with all three hulls. Both my Greener and George T. Abbey(probably a Scott made gun) have laminated steel barrels and the tested pressure ranges are comfortable in these heavy barrels. Neither guns are tightly choked or overly heavy at under 9 pounds. I think of them as over bored heavy 12's. Great guns and great loads.
Eric Johanen is offline   Reply With Quote