View Single Post
Unread 01-08-2019, 08:12 PM   #5
Member
B. Dudley
PGCA Lifetime
Member
 
Brian Dudley's Avatar

Member Info
 
Join Date: Aug 2011
Posts: 7,330
Thanks: 275
Thanked 8,862 Times in 2,596 Posts

Default

The ribs may still be attached, but that does not mean that the solder joints have not been compromised. The joints can get softened and allow things to move before setting back up and reduce the holding power of the solder.

Salts can get between the barrels and get trapped and cause rusting from the inside out.

Or, nothing can get compromised at all.

If you see no evidence of issues, it is best to just shoot it until something does or does
not happen.

Re-bluing them by the slow rust methos does nothing to “fix” the problem beyond cosmetics and polish. If there are actual issues from the hot blue, the only way to correct them is to take the barrel set apart and re-solder everything.

If you have a set of barrels that were hot blued, I would stay away from very high volume shooting, which will generate a lot of heat in the barrels.
__________________
B. Dudley
Brian Dudley is offline   Reply With Quote
The Following 6 Users Say Thank You to Brian Dudley For Your Post:
Visit Brian Dudley's homepage!