View Single Post
Unread 10-16-2021, 08:33 AM   #6
Member
Stan Hillis
PGCA Member

Member Info
 
Join Date: Oct 2015
Posts: 1,694
Thanks: 3,143
Thanked 3,898 Times in 1,112 Posts

Default

Salient points, Bruce. Concerning the wood to metal fit ..........

I have been considering a project to convert a restocked A grade Philly Fox from a semi-beavertail to a long splinter. Doing due diligence to determine if the wood is currently fitted closely enough to the underside and sides of the barrels, so as to not have unsightly gaps when the excess wood is cut away, I have been measuring how well the upper edges of the f/e wood is fitted to the barrels on many of my splinter f/e vintage guns.

I have yet to find one that is fitted snugly along these edges, including my high condition DHE Parker. My graded Foxes have a uniform space from front to within about an inch of the f/e iron that will accept .025" - .030" shim all that way. Make no mistake, these forends are tight to the gun, with no looseness, but the upper edges are not contacting the barrels.

If any of you have your better grades of American classics out any time soon, and can spare a moment to check that fit for me, would you please? I would be very appreciative.

Brian, could you shed any light on this from a gunstocker's point of view?

Last edited by Stan Hillis; 10-16-2021 at 08:36 AM.. Reason: dang spellcheck
Stan Hillis is offline   Reply With Quote