Restored DH 10
Brad Bachelder did the wood and metal. Craig Smith did the barrels a couple of years ago. Unfortunately I can't seem to find any of the before pictures. All the screws in the sides of the action were buggered and replaced, a significant wood repair was done on the left cheek area and a brass pin removed. The case colors match the colors of the inside of the gun that were not totally abliterated by lots of use. It is on a 3 frame 1892 mfg and about 10 lbs with full/full chokes. It has been the go to Honker gun for a few years and will continue to be.
The last picture is of a little pigeon shoot we had with an Ithaca Mag 10 with 34" bbls, Lefever 10 and Parker DH10.
|