View Single Post
Unread 09-04-2018, 10:31 PM   #10
Member
Tom Flanigan
PGCA Lifetime
Member
 
Tom Flanigan's Avatar

Member Info
 
Join Date: Mar 2018
Posts: 865
Thanks: 284
Thanked 1,253 Times in 425 Posts

Default

Acetone is your best bet Brian. A good long soak may solve the oil problem. But you might want to consider relaying the ribs at some point. I would have someone familiar with Parkers do the work. There are some good people out there, many of whom have been mentioned on this board. Moisture will collect under leaky ribs and you may damage the barrels eventually if you don't fix the problem.

A quick fix to get the barrels done could be provided by mixing glass bedding compound with a bit of black color and very carefully placing it at the base of the rib where it leaks. Make it very thin, just enough to prevent the barrels from leaking. Brownell's glass bedding compound is not impacted by boiling water. It's a quick fix but it will get you through the bluing process. Don't use the acraglas gel, use the regular acraglas for this situation.
Tom Flanigan is offline   Reply With Quote