Quote:
Originally Posted by CraigThompson
I'm not sure how to explain the WIN hulls to be honest but I'll try !
I was using brand new once fired WIN hulls in the 9000 . Set them in the collet to deprime and resize and the thing I think was not holding them tight enough (but it had no issue with REM or Federal hulls) or maybe the base metal was really soft anyway they would push through and pretty much do away with the rim at the base... .
|
What's happening is that the Win. hull does not fall down FAR ENOUGH into the collet of the 9000. The oversize rim keeps it "UP" above the rim recess and the collet subsequently squishes the rim out of the case head. Try opening the collet adjustment nut a tad for more room, or simply push DOWN on the hull until it bottoms in the collet.