Quote:
Originally Posted by Dave Suponski
Mike,Original butt plates could be a chore to locate.The repro butt plates aren't a bad deal as long as they will fit your gun without too much removal of material.Trojans to the best of my knowledge never left the factory with recoil pads. But if the stock has been cut and you need the added length to make it shootable then by all means if it were my gun I would just do it.
|
Never say never Dave, Scott has a Trojan 12ga with factory 26" tubes (which I believe is pretty rare) and it is fitted with what appears to be an orginal Hawkins Pad from the factory. (I think he may sell it as he makes room for that beautiful BHE he recently bought).
Mike the hard rubber butt plate is going to add about 1/4 inch to your LOP. If you are 13 3/4 to 13 7/8" from trigger to wood I doubt the gun was cut.