View Single Post
Unread 11-30-2019, 10:30 AM   #5
Member
J. A. EARLY
PGCA Member
 
Jerry Harlow's Avatar

Member Info
 
Join Date: Nov 2010
Posts: 1,956
Thanks: 3,967
Thanked 2,693 Times in 871 Posts

Default

Drew,

Thank you so much for the information. It will go on the tag I keep on the gun.

The choke information is:

R: 18.3/18.5 then 17.6/18.4

l: 17.6/18.4


r: 18.5 mm = .728 18.3 mm = .720 so I am seeing .008 which is skeet
L:18.4 mm = .724 17.6 mm = .692 so I am seeing .032 which is I.M./light full

I measured .006 and .030 with my gauge, so obviously the choke in the right barrel was opened.



choke is stamped in front of each marking, except the 18.3/18.5

The 17.6/18.4 on each barrel are in line with each other. The 18.3/18.5 on the right barrel is in front of it.

Acier Special with a crown and ML below the crown to the left and right of each Acier Special on each barrel.

Thanks again.

p.s. For insurance purposes, what would anyone estimate the value of this gun? It will never be sold but will go to my oldest son who when he was a little boy was fortunate enough to spend time with my uncle.
Jerry Harlow is offline   Reply With Quote