03-17-2014, 05:26 PM
|
#5
|
Member
|
|
Member Info
|
Join Date: Jul 2010
Posts: 7,797
Thanks: 1,641
Thanked 8,138 Times in 3,254 Posts
|
|
Quote:
The pins do protrude through the breach face when at rest, the exact same amount left and right.
I will check the fireing pin springs next, to be quite honest I never knew it had some in there. I have not taken it that far apart yet.
I'm guessing the fireing pin goes out pretty far hits the primer then the hammer is held in check and a light spring retracts the pin a few thousandths.
Is this how the system works ?
|
Yes, I do not believe the firing pins would protrude if the springs were in place and in good shape. Unless the firing pin has broken - I had one the still fired broken, it was the tip not retracting that gave me the clue something was wrong.
Quote:
This is a DH hammer less model, don't know if they are all the same .
|
and yes - all grades function alike
__________________
"If there is a heaven it must have thinning aspen gold, and flighting woodcock, and a bird dog" GBE
|
|
|