Quote:
Originally Posted by Brian Dudley
You can also try just clicking the safety off and then opening the gun WITHOUT tripping the hammers. This will still reset the safety when opening.
The opening of the gun has nothing to do with the gun being fired or not, especially dry firing. So you should be able to just take that out of the equation.
If the feel of opening and closing the gun is fine by itself, but only when the safety is reset, then the issue is related to the reset rod/safety slide. If it is present regardless of safety operation, then it could be an issue with a sticky top lever spring/plunger.
If in fact the issue IS only when dry firing, then you have me at a loss since nothing related to firing of the gun crosses paths with the T/L mechanism.
|
I may be wrong, but without dropping the hammers, the sears will exert downward pressure and it may make the safety operated manually forward and opened with the lever have little or no resistance, but having dropped both hammers, and then opening have greater resistance as the trigger is now in a more upward position, not held in check by the cocked sears.
The best test would be to do it both ways, first without having fired on snap caps, push the safety off to see if it is harder when opening, and then back and open to see if there is not the hitch anymore.
Then try it after firing, and feeling for the hitch when opening. If it is greater it is the safety lever meeting resistance as it is pushed over the trigger.
Brian can easily fix any problems.