Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)

- Parker Hammer Guns (https://parkerguns.org/forums/forumdisplay.php?f=14)

- - Barrels (https://parkerguns.org/forums/showthread.php?t=15673)

Steve Huffman

02-20-2015 12:57 PM

Barrels

Do you think a set of 30" barrels would touch at muzzle if they were cut down to 28 " This is a early hammer /lifter SN 3469 book has it at 30" and they are 28 " and touch . Has no rib matting . I have no pictures to show.

Jim DiSpagno

02-20-2015 01:58 PM

IMHO, yes it is possible as I have a set of 10ga 28" cut from30"" that touch

Bill Murphy

02-20-2015 03:43 PM

The SB could be in error or the gun could be cut. Measuring the bores and chokes is step one. Ordering a PGCA letter is step 2. Either way, you have a nice early Parker.

Virginia Hessler

02-20-2015 09:04 PM

I actually have a set of 30" lifter barrels cut to 28" and yes they touch.
Tom

All times are GMT -4. The time now is 07:57 AM.