3-Frame, 12-gauge, 32-inch
 

For someone really dedicated, there is a Quality PH on GI that needs some serious saving!!

Attachment 90613

Attachment 90614

Yes I have been in contact with him That tang screw hole is kinda iffy I more just want the barrels as I have a 3 frame 10 300 numbers apart that hope to fit for a 2 barrel set

hope you luck ...I have a 3 fram 12 gawighs 9 1/4 lbs got 3 inch chambers..will really do good on ducks and geese....I tried putting them on a 3 frame 10 ga but they would not work without a lot of work but my numbers were off by several thousand....good luck....charlie

Yes I know its a gamble but I can shoot it the way it is if all fails . made a offer will see what happens

Charlie you have a 3 frame complete gun that weighs 9 1/4 pounds or just the barrels that weigh that much ?

It probably would not be too hard to save. If it were a Grade 2 I would have already bought it

Would you restock it or what ?

A perfect example of when someone thinks they need to re-engineer something by adding more screws. And bigger ones at that. With how poorly fitted that replacement stock is, the extra screws are likely necessary to hold it on.

The barrels look nice, the little of them that I see.

If the stock was not salvageable, it would not be worth a restock

[QUOTE=Brian Dudley;317693]A perfect example of when someone thinks they need to re-engineer something by adding more screws. And bigger ones at that. With how poorly fitted that replacement stock is, the extra screws are likely necessary to hold it on.

Probably the same moron who drilled a second hole through the engraving on the trigger guard tang on my 16 ga. 0 frame AH when he couldn't get it to lie flush to the inletting of the crappy VH stock he tried to fit to it!!