W.A.G. On frwme size
 

No liability attached...anyone care to guess what frame size the stock head matches up to?

Mark, don't you have a vernier caliper you can put on it?





.

I do Dean, but this is a seller on an auction site, the seller is not uncooperative, but IS unmotivated.....willing to take a flyer if there is a chance that it is an 00 frame stock.....

Are you looking for a PG or a SG?





.

That stock is garbage.

Not an original Parker stock, but if you need it, it probably can be made to work. I would reinforce the head of that stock with glass bedding compound.

Enough said! I’ll leave that one alone!

Dean, to answer your question, half pistol or ball preferred so I don’t have source a trigger guard. That being said, i would also consider straight. This for a custom project that I want to keep costs below the stratosphere. Gunsmith that measured MBWT was wrong, and an idiot. Kirk M. says they are rough, but shootable at .21 with rst’s. Just no room for making them nice. So with the other issues the gun has, I’m going to piece together a “budget” custom gun to kill birds with!