Short ten load
 

Good day guys and gals.
Getting a bit bored over here (England) lockdown. Does any one have hard hitting Data for the short Ten, I will using it for goose shooting, I have Mixture of shells mainly Remington and Winchester, and 209/209A primers Sp10 wads and also fibre wads, I will using lead. Just want some thing to it them hard at distance.
Thankyou and keep well.
Steve

Good Morning Steve -

If you click on the Search tab above and type in Short Ten many threads will appear and there are several tried and true loads for that cartridge listed there.

Best, Dean





.

what dean said....pete lester done a fine job posting all of these 10 ga loads..i have used several of these loads myself...good hunting...this virus got the U S LOCK DOWN TOO....charlie

Steve:

Check out Load #3:

http://parkerguns.org/forums/showthr...&highlight=Wsf

You can swap the bismuth for lead. (See Load #4.)

I used Load #3 to kill these geese. They dropped dead.

-Victor

Love your Parker Victor, with the P stamped Laminated Steel barrels.





.

If the OP comes back - you didn't say what powder you're useing. You may have a problem with our loads if you can't get the same powder.

10ga Rem Hull cut to 2 7/8"
Win 209
27.0 gr Green Dot
(1) .125 NC 40lbs wad pressure + (2) 1/2" Fiber + (1) OSC ( all 10ga)
1 1/4 oz #7.5 lead
6 fold Crimp
1204 fps, ev 11 - 7233 psi ev 400

Thankyou guys for the info. And take care.

Steve,

The lock down is a walk in the park.