Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (http://parkerguns.org/forums/index.php)
-   Damascus Barrels & Steel (http://parkerguns.org/forums/forumdisplay.php?f=31)
-   -   Damascus bbl protective coating (http://parkerguns.org/forums/showthread.php?t=30356)

Don Strelioff 06-04-2020 10:17 PM

Damascus bbl protective coating
 
Should Damascus bbl’s have some type of sealant on the outside. Example lacquer or wax or varnish . Just curious I have a Parker with Damascus bbl’s I read somewhere about coating them . Just asking

Brian Dudley 06-05-2020 10:52 PM

Same with case colors. Some put a coating on them some don’t.
Parker did not originally coat their metal finishes with any sort of protective coating. And some of the costs that people use can soften and flake off when used. I personally prefer to just keep things wiped down with oil and keep them natural.

Don Strelioff 06-05-2020 10:59 PM

Thanks for the info I don’t use a coating as such just oil on the metal and sometimes wax on the wood

Harry Collins 06-06-2020 10:13 AM

When I refinish Damascus and Twist barrels I wax them. The rational is this: during refinishing the barrels have been in a lot of water and to make sure there is none left under the ribs a heat gun is used to ensure dryness. If any moisture weeps from under the ribs the wax will keep it from ruining the finish. The wax on the barrels is then buffed.

Breck Gorman 06-09-2020 12:28 AM

Dale Edmunds recommended a hard carnauba wax. Bachelder recommended Watco Danish oil. Oscar Gaddy used a spray lacquer.
Renaissance Wax is not a good product on Damascus, and can obscure the pattern in my experience.
I’m with Harry. A Good hard wax protects, doesn’t get affected when it’s wiped with light gun oil, and doesn’t chip or yellow like lacquer or drying oils.


All times are GMT -4. The time now is 04:13 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 1998 - 2020, Parkerguns.org