Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   Parker Paper, Memorabilia and Books (https://parkerguns.org/forums/forumdisplay.php?f=13)
-   -   United Hardware Co of Torrington, Conn. (https://parkerguns.org/forums/showthread.php?t=26347)

allen newell 01-25-2019 09:59 AM

Union Hardware Co of Torrington, Conn.
 
I have a powder and shot measure made by the Union (edited) Hardware Co, of Torrington, Conn. I've googled all the companies in Torrington. They are obviously long gone.

Besides making these wooden handled powder and shot measure tools, does anyone know what else they may have made in the shooting sports equipment? Any one know the history of this company?

Dean Romig 01-25-2019 10:08 AM

You might contact Dave Suponski about that. He has a really good knowledge of such companies that were located in Connecticut.





.

Garth Gustafson 01-25-2019 10:58 AM

Allen,
I grew up in that area but I'm not familiar with United. Could you be referring to Union Hardware in Torrington? They were well known for their many small cast products.

allen newell 01-25-2019 11:23 AM

Yes, I meant Union Hardware. Thanks. My bad. I've edited my original post above to correct the initial error

Garth Gustafson 01-25-2019 11:43 AM

Union Hardware was around for a very long time. Try the Torrington Historical Society. They might be able to tell you more about the company. Good luck.

Rick Losey 01-25-2019 01:05 PM

Quote:

Originally Posted by allen newell (Post 263864)


Besides making these wooden handled powder and shot measure tools, does anyone know what else they may have made in the shooting sports equipment? Any one know the history of this company?

other than reloading equipment - and sporting not shooting

they also made bamboo flyrods - often trade rods - a search on the classic (Clarks) rod board will find examples

http://classicflyrodforum.com/forum/...ington#p745106

Jacob Duke 01-30-2019 07:27 PM

Quote:

Originally Posted by Rick Losey (Post 263884)
other than reloading equipment - and sporting not shooting

they also made bamboo flyrods - often trade rods - a search on the classic (Clarks) rod board will find examples

http://classicflyrodforum.com/forum/...ington#p745106

I picked up a bamboo flyrod made by them back in the fall. It’s a nice casting rod. Now I just need to pick up a reel from them, since none of mine seat properly.

edgarspencer 01-31-2019 03:35 PM

If you had a pulse, and lived in Torrington, you either worked for The Torrington Co (Later owned by Fafnir) or Union Hardware.

Reggie Bishop 01-31-2019 04:27 PM

They were also one of the suppliers of bamboo rods for LL Bean. The Bean fly rods were outsourced to various makers, Union Hardware being one of them. They are not as valued as a Bean rod made by say, Phillipson.


All times are GMT -4. The time now is 06:17 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2023, Parkerguns.org