Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   Damascus Barrels & Steel (https://parkerguns.org/forums/forumdisplay.php?f=31)
-   -   Scott K's G grade damascus (https://parkerguns.org/forums/showthread.php?t=17065)

Pete Lester 08-18-2015 11:02 AM

Scott K's G grade damascus
 
1 Attachment(s)
I am posting a photo for Scott Kittredge. Seems he has an GH with a finer pattern of damascus than usual. In the picture is the fine pattern GH on top and a more common pattern the GHE below it. Anybody know if that pattern usually goes with a higher grade gun and what the pattern is?

Bruce Day 08-18-2015 11:26 AM

That's "fine Damascus ". I count four blade croille, instead of the normal G grade 2 blade. My count may be off. Others count blades better than I do.

Certainly a bonus for a G grade. With some Gs you get mismatched barrels. My speculation is that those barrels were in stock and what was grabbed at the time.

Nice.

Dean Romig 08-18-2015 10:37 PM

The tubes may also have been sourced from different suppliers or barrel-makers.

Most Damascus barrels I have seen on Grade 2 Parkers were 3-blade or three-iron crolle.
I have however, seen Grade 3 Parkers with both three-iron and four-iron Damascus barrels.
If memory serves, the two-iron barrels were on much earlier hammer guns.

These are just my opinions taken from years of observation.





.


All times are GMT -4. The time now is 11:52 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org