Parker lifter firing pins/bushings and stock
 

I picked up a parker lifter from an antique gun dealer for a pretty good piece it was missing the firing pins and bushings and needs a stock but the action is tight barrels are sound. And the forend is present and complete but I need to acquire or make a stock and firing pins and bushings.

I would like to either make the stock or get a modest 95% inleted stock which I am not to worried about but the firing pins and bushings are proving to be quite difficult to find any info on I have seen a few pictures of them in the take down guide on this site but I have not been able to find any info on them particularly the thread size and pitch best I can tell they are 3/8 something finer than 24 any advice on acquiring a stock blank or firing pins and bushings would be much appreciated I have a lathe so making the bushings wouldn't be to big a deal if I knew the size and and pitch I just don't want to guess and bubba up the gun if it can be avoided

Join the PGCA and get "Parker Pages" and you will see this, and more.....

You will not find a semi-inletted Parker Lifter stock from any commercially available source... You would have to contract with someone to have one made. Contact dave for Firing pins. And he may be able to help you with the proper springs for them too.