PHE 10ga 36"
 

I'm looking for specialized advice on the desirability of PHE 10ga 3 frame 36" Parker Steel barrels, letters as such, little used. I'd appreciate the comments of those who collect and use the big guns.

That is a rather rare gun. The Parker Story does not show a P 10 with 36" barrels.
It was probably in one of the missing books.

Major

Jeff's statement as "rather rare" is an understatement ! I can speak as a former PHE 28 bore , 24" original barrel length ,2 frame as maybe the only .

Your PHE ,10 bore , 3 FRAME, 34" barrels might be the only. Missing books? Can not be proved either way.

Allan

Correction ---36"Barrels-----even more rare !!!

Is this the same 36” 10 gauge that was in the Auction held at Cliff Schuler auctions in Florida about 6 or so weeks ago ?

Please post a picture of the letter.

PML

A rare PHE 10ga with a vent rib just sold on this site with an asking price of 9750.
I purchased a very nice CH 10ga 34" (one of 3 I believe) for half the price of the PHE. I bought a D hammer gun 10ga 36 inch (1 of 3) for less than 5k.
I would say plenty of interest in a PHE 10/36 from big gun collectors. Condition will be the most significant factor, my guess is a 3K premium over a 10ga PHE 10/32 gun of equal condition. Just my guess.

To Craig - yes

Letter is attached

Thanks for posting the letter, how about pictures of the gun?? Very cool.