Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)

- Shotgun Shell Reloading (https://parkerguns.org/forums/forumdisplay.php?f=21)

- - 16g loads (https://parkerguns.org/forums/showthread.php?t=1023)

eddie gray

12-12-2009 07:14 PM

16g loads

brought some multi 16g hulls and sr-16 wads
thinking of loading 16.4 clays 7/8 .would this be a good load
also will i need a filler wad
thanks eddie

Dave Miles

12-14-2009 12:40 PM

Quote:

Originally Posted by eddie gray (Post 9032)

brought some multi 16g hulls and sr-16 wads
thinking of loading 16.4 clays 7/8 .would this be a good load
also will i need a filler wad
thanks eddie

The Multi-hull is a Cheddite hull, if you mean SP-16 Rem. wad?
That is not the best wad for that hull, or a 7/8 oz. load. Yes, you will need filler.

eddie gray

12-14-2009 06:09 PM

sorry sg-16 wad from bp products

Dave Miles

12-15-2009 07:33 AM

Eddie,

Are you looking for a low pressure load?
Do you want your hulls to be 2-1/2" or the regular 2-3/4"?
Post your e-mail address along with your response, and I'll send you some data.
Regards, Dave

eddie gray

12-15-2009 07:38 AM

hi dave
2 3/4 loading for low pressure loads
e-mail is whitedogs@comcast.net
thanks eddie

Dave Miles

12-15-2009 10:37 AM

Eddie,

I sent you some load data.
Personally I load about everything in the 2-1/2" hull.
You may want to look into the new DR-16 wad for 7/8 oz in the 2-3/4" hull.
It's made by Downrange, and is designed for this purpose with the Cheddite hull.

All times are GMT -4. The time now is 03:16 PM.