SST & DT stock interchangability?
Will a Parker stock that was originally made for a double trigger gun fit properly on a Parker SST gun? If not, what has to be done? How about visa versa?
|
As good as any non serial # stock will fit another frame ,the only difference is dig out wood on a DT stock or add it and reinlet to the SST void ....its a gamble ,sometimes they fit beautifully -other times not so much
|
The selector mechanism housing requires a significant recess be cut into the wood to accept it.
. |
So, if wood has to be removed from a stock intended for a DT gun to be fitted onto a gun with a SST, is the stock then inherently weaker and as a result more prone to cracking at the head?
|
Not really... if so we would see stocks on single trigger guns failing more than stocks on double trigger guns and I don’t think we have seen that.
. |
All times are GMT -4. The time now is 10:11 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2024, Parkerguns.org