Phew!
 

My arm's in a sling, and I'm researching if there is a water-cooled option for my PW800 Plus. 40 boxes of Sporting Clays loads over the three days.

1 oz 7 1/2. 16 gr 700X

Nice work - don't stop now, Ripley's is looking for a new record!





.

that machine must have been red hot....charlie

Were you doing all this with one arm? Must have taken quite a bit of time.

Fortunately, I still have 'em both. Right hand pulls the handle, the left hand sets the empty hull and then the wad

Phew!
 

I'm impressed. Can you provide the pressure, hull, velocity, primer info? Thanks.

Back a number of years ago I had four of the 800C loaders bolted on my bench and usually I load for a weekend skeet shoot on Thursday or Friday night . Usually that entailed four hundred 20’s , 150 28’s and 150 410’s . I will say I was a lot more motivated then ! I could usually load the 700 or so in about three hours .

Buddy- My computer has crashed. Will get you the data as soon as I get it sorted

Craig, my attention span is about 100 shells on a MEC Grabber. Thats about 10 minutes worth once set up.

Buddy - Back home with a repaired computer.
Win AA 12 Ga. hulls
Win 209 Primers
IMR 700X 16 gr.
1 oz 7 1/2 lead

Data sheet shows 8000 PSI, 1125 fps.

Hope this helps